Specifications:
Air flow : 1.8 cu m/min
Noise Level : 45dba (at 1 m)
Power Supply : 210V – 250V AC/50Hz
Ionization Voltage : +/- 6KV
Un Balance Voltage : < +/- 100V
Construction : Power coated MS cabinet
Dimensions : 230 x 150 x 110mm
Weight : Apex. 2.9 Kgs
Warranty : One Year
Ions Coverage Area
1 foot 1 foot 1 foot 1 foot
1 Foot
Test Conditions
1. Test data available using ME268A Charge plate monitor
2. Test Figures are subject to the variation in the atmosphere and
Input Ac voltage.
3. Decay Times are found from 1000V to 100V in accordance with
EOS/ESD S-3.
4. All data taken using full fan speed
qt8gt0bxhw|00106618884B|master_product|specification|DEDC90CF-BC7D-4581-AEBA-0D4F44BA2582
Air ions are molecules that have lost or gained an electron. Ions are
present in normal air but are “ stripped” out when an air is subject to
filtration and conditioning. They are produced by radioactive
emission or by phenomenon called “corona discharge” where a high
voltage is applied to sharp point.
All air ionization systems work by flooding the atmosphere with
positive and negative ion, when ionized air comes in contact with a
charge surface; the charge surface attracts ions of the opposite
polarity. As a result the static electricity that has build up on
products, equipment and surface is neutralized.
Typically, air is very insulative with a resistive exceeding 10E15
ohms/meter. By increasing the numbers of ions in the air it is
possible to lower the Resistivity of the air to 10E11 ohms/meter,
there by making the air more conductive. Conductive air can
neutralize the static charge on every surface that it contents. The
field from the charged surface attracts ions of the opposite polarity
until the charged on the surface is neutralized.
The Static neutralizer is portable and uses a small fan to produce
airflow. High voltages generated out of the supply line voltage are
applied to stainless steel ion emitter points. These points produce
intense alternating polarities, ionizing the air instantly in the fan
airflow.
The Static neutralizer is designed for use when handling sensitive
electronic components where electrostatic discharge is a problem.
The unit can also used where static electricity causes problems such
as; attraction of drift to product, misalignment of small parts due to
electrostatic “jumping” and undesirable adhesion of plastic films due
to electrostatic charge.